HP XP P9500 Storage - Manual (Page 65)

Figure 30 LDEV grouping from P9500 (device group and copy group)
However, for executing replication function commands in RAID Manager, two device groups must
be combined and defined as a copy group.
When defining a device group or copy group by a command, it can be used from multiple RAID
Manager instances because the group information is defined in the storage system.
Device group definition methods
To define a device group or copy group in the RAID Manager that supports P9500 or later, use
one or both of following methods.
•
Execute a command
Creates a device group with the raidcom add device_grp, and specifies a device name and
device group name with which to define a copy group, and then executes the raidcom add
copy_grp command. Once the command is executed, the RAID Manager description of
LDEV group function 65