HP XP P9500 Storage - Manual (Page 84)

4 Starting up RAID Manager
After you have installed the RAID Manager software, set the command device, created the
configuration definition file(s), and (for OpenVMS only) followed the porting requirements and
restrictions, you can begin using the RAID Manager software. One or two instances of RAID
Manager can be used simultaneously in the UNIX, Windows, and OpenVMS operating system
environments.
Starting up on UNIX systems
One instance
To start up one instance of RAID Manager on a UNIX system:
1.
Modify /etc/services to register the port name/number (service) of each configuration definition
file. The port name/number must be different for each RAID Manager instance.
horcm0 xxxxx/udp
xxxxx = the port name/number for horcm0.conf
horcm1 yyyyy/udp
yyyyy = the port name/number for horcm1.conf
2. If you want HORCM to start automatically each time the system starts up, add
/etc/horcmstart.sh 0 1 to the system automatic startup file (e.g., /sbin/rc).
3. Execute the horcmstart.sh script manually to start the RAID Manager instances: # horcmstart.sh
0 1
4. Set an instance number to the environment that executes a command:
For B shell: # HORCMINST=X
X = instance number = 0 or 1 # export HORCMINST
For C shell: # setenv HORCMINST X
5. Set the log directory (HORCC_LOG) in the command execution environment as needed.
6. If you want to perform Continuous Access Synchronous operations, do not set the HORCC_MRCF
environment variable. If you want to perform Business Copy operations, set the HORCC_MRCF
environment variable for the HORCM execution environment.
For B shell:
# HORCC_MRCF=1 # export HORCC_MRCF
For C shell:
# setenv HORCC_MRCF 1 # pairdisplay -g xxxx xxxx = group name
Two instances
To start up two instances of RAID Manager on a UNIX system:
1.
Modify /etc/services to register the port name/number (service) of each configuration definition
file. The port name/number must be different for each RAID Manager instance.
horcm0 xxxxx/udp
xxxxx = the port name/number for horcm0.conf
horcm1 yyyyy/udp
yyyyy = the port name/number for horcm1.conf
2. If you want HORCM to start automatically each time the system starts up, add
/etc/horcmstart.sh 0 1 to the system automatic startup file (e.g., /sbin/rc).
84 Starting up RAID Manager