HP XP RAID Manager Software - Manual (Page 123)

Description Item
• mm: minute
•
ss: second
The operation’s P-VOL, identified by LDKC:CU:LDEV. P-VOL
A device identifier ending in the pound sign (#) (e.g., 00:00:3C #), indicates that the LDEV
is an external volume.
For more information about external volumes, see the HP XP P9000 External Storage for Open
and Mainframe Systems User Guide.
Note: A device identifier ending in ‘X’ (e.g., 00:00:3C X) indicates that the LDEV is a THP
V-VOL.
For more information about V-VOL, see the HP XP P9000 Provisioning for Open Systems User
Guide.
The operation’s S-VOL (V-VOL), identified by LDKC:CU:LDEV. S-VOL
A device ID ending in V (e.g., 00:00:01 V) indicates that the LDEV is a V-VOL.
The SS ID. MU
ID of the related data pool. Pool ID
SS reference code, which indicates the kind of operation that was performed. For more
information, see
“Reference codes” (page 123) .
Code
Describes the operation. Related to the reference code. Message
Reference codes
Reference code and message information about SS and FS operations is shown in the Code and
Message columns in the History window.
The following table lists descriptions for the columns.
Description Message Code
The pair was created. PAIR 2001
The pair was split. PSUS 2011
The pair was deleted. SMPL 2021
Pair restoration started. COPY(RS-R) START 2030
Pair restoration ended normally. COPY(RS-R) END 2031
Pair restoration ended abnormally. COPY(RS-R) ENDED ABNORMAL 2032
The SS data was deleted. COPY(RS) 2051
A failure occurred and the status of the pair changed to PSUE. PSUE(ABNORMAL END) 2070
Initialization started. INITIALIZE START 2040
Initialization ended normally. INITIALIZE END 2041
Initialization ended abnormally. INITIALIZE ENDED ABNORMAL 2042
Snapshot window
The Snapshot window shows SS pool information.
Snapshot window 123