HP Insight Management Agents - Manual (Page 86)

CD Library Information
Select the Library Information entry from the CD Storage System list to display the following
information:
•
Status—Displays the current fault light status of the CD Library. The following values are valid:
OK—The library is operating normally. ◦
◦ Failed—Indicates that the CD library fault light is in a failed state. The fault light is activated
for hardware errors (Sense Code 04h) with additional Sense codes—40h-4fh except the
parity error. The LED remains illuminated until it is power cycled.
◦ Unknown—The state of the library cannot be determined.
•
Vendor—Displays the vendor name for the CD Library. This item can be used for identification
purposes.
•
Model—Displays the model name of the CD Library. This value can be used for identification
purposes.
•
Serial Number—Displays the serial number of the CD Library. This value can be used for
identification purposes.
•
Firmware Version—Displays the firmware revision of the CD Library.
CD-ROM drive information
Select a CD-ROM drive from the CD Storage System list to display the following information:
•
Vendor—Displays the vendor name for the CD-ROM drive
•
Model—Displays the model name of the CD-ROM drive
•
Firmware Rev—Displays the firmware revision of the CD-ROM drive
•
LUN—Displays the logical unit number of the CD-ROM drive
Storage systems
Select a storage system item from the SCSI controller submenu to display the following information
about ProLiant Storage Systems.
•
Box Type—Displays the type of drive enclosure, or box. The following types of enclosures are
possible:
◦ External Storage System—Outside the machine.
◦ Internal Storage System—Inside the machine.
◦ Unknown—The Storage Agents do not recognize the drive enclosure. You might need to
upgrade your software.
•
Vendor—Displays the name of the vendor that produces this drive enclosure or box type. Use
this information for identification purposes.
•
Model—Displays the model of the storage system. Use this information for identification
purposes.
•
Firmware Revision—Displays the firmware revision of the drive enclosure or box. Use this
information for identification purposes.
•
Board Revision—Displays the board revision level of this storage system backplane.
•
Serial Number—Displays the serial number of the drive enclosure or box. Use this information
for identification purposes.
86 Agent information