HP StoreEver LTO Ultrium Tape Blades - Manual (Page 25)

Figure 6 Paired locations in a c3000 enclosure with a half-height partner server blade
. 2. Use the Shutdown command on the partner server blade to power down the partner server blade.
3. Remove the blank from the device bay. Squeeze in the release tabs (1) and pull the blank away
from the assembly (2), as illustrated in
Figure 7 .
In the following figure the partner server blade is installed in device bay 2. So, the blank has
been removed from device bay 1.
Figure 7 Removing the blank
.
Tape Blade 25