Conserving battery power, Identifying low battery levels, Resolving a low battery level – HP ENVY TouchSmart 14-k120us Ultrabook User Manual

Page 53

Advertising
background image

Conserving battery power

Tips for conserving battery power and maximizing battery life:

●

Lower the brightness on the display.

●

Select the Power saver setting in Power Options.

●

Turn off wireless when you are not using them.

●

Disconnect unused external devices that are not plugged into an external power source, such as
an external hard drive connected to a USB port.

●

Stop, disable, or remove any external media cards that you are not using.

●

Before you leave your work, initiate Sleep or shut down the computer.

Identifying low battery levels

When a battery that is the sole power source for the computer reaches a low or critical battery level,
the following behavior occurs:

●

The battery light (select models only) indicates a low or critical battery level.

– or –

●

The power meter icon on the Windows desktop shows a low or critical battery notification.

NOTE:

For additional information about the power meter, see

Using the power meter and

power settings on page 42

.

On select models, the computer takes the following actions for a critical battery level:

●

If Hibernation is disabled and the computer is on or in the Sleep state, the computer remains
briefly in the Sleep state, and then shuts down and loses any unsaved information.

●

If Hibernation is enabled and the computer is on or in the Sleep state, the computer initiates
Hibernation.

Resolving a low battery level

Resolving a low battery level when external power is available

●

Connect an AC adapter.

●

Connect an optional docking or expansion device.

●

Connect an optional power adapter purchased as an accessory from HP.

Resolving a low battery level when no power source is available

Save your work and shut down the computer.

Resolving a low battery level when the computer cannot exit Hibernation

When the computer lacks sufficient power to exit Hibernation, follow these steps:

1.

Connect the AC adapter to the computer and to external power.

2.

Exit Hibernation by pressing the power button.

Running on battery power

43

Advertising