HP NC375T PCI Express Quad Port Gigabit Server Adapter - Manual (Page 10)

Specifications 10
Specifications
HP NC375T PCI Express Quad Port Gigabit Server
Adapter specifications
Specification Value
Network controller chipsets Netxen NX3031
Bus type
x4 PCI-Express v2.0 & v1.1
Bus width Four lanes
On-board memory 128MB for PCA
Data transfer method Bus Master DMA
Boot ROM support Yes
Management capabilities PXE 2.2, ACPI 1.1a, ASF 2.0
Power requirement 14W @ 3.3V Max
12.5W @3.3V Typical
11.5W @ 3.3V Idle
Data transmission rate 10 Full/10 Half, 100 Full/100 Half, 1000 Full
Standards supported IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x (flow control), IEEE
802.3ad (link aggregation), IEEE 802.1p (QoS), IEEE 802.1q (VLAN tagging),
IEEE802.3z
Dimensions 16.76 cm x 6.86 cm [6.6 in x 2.7 in (L x W)] (without bracket)
Connector and distances 10BASE-T: Category 3, 4, or 5 UTP 100 m (328 ft)
100BASE-TX: CAT5 UTP 100 m (328 ft)
1000BASE-TX: CAT5 UTP 100 m (328 ft)
Interrupts supported Automatically configured
Temperature range Operating: 0°C to 55°C (32°F to 131°F)
Storage: -65°C to 85°C (-85°F to 185°F)
Relative humidity (non-
condensing) Operating: 10% to 90%
Storage: 5% to 95%
Safety compliance UL Mark (US and Canada)
CE Mark
EN 60590
RoHS (European Union)