HP Deskjet 5145 Color Inkjet Printer - Manual (Page 142)

printer is slow
Several variables can slow the printer's performance.
multiple software applications are open
The computer does not have sufficient resources for the printer to print at its
optimum speed.
To increase printer speed, close all unnecessary software applications when printing.
complex documents, graphics, or photographs are printing
Documents containing graphics or photographs print slower than text documents.
If your computer does not have enough memory or disk space to print the document
under normal conditions, you can use Low Memory Mode. Using this option may
reduce the quality of the printout. Low Memory Mode also disables 4800 x 1200
optimized dpi printing.
To activate Low Memory Mode:
1. Open the Printer Properties dialog box.
2. Click the Basics tab, then click the Advanced Features button.
3. Select Low Memory Mode .
4. Print the document.
best or maximum dpi print mode is selected
The printer prints slower when Best or Maximum dpi is selected as the print quality.
To increase the printer speed, select a different print quality mode.
printer driver is outdated
An outdated printer driver may be installed.
For information about updating the printer driver, click here.
two-sided documents are printing
Printing two-sided documents takes more time than printing single-sided documents.
To increase speed, open the Advanced Features dialog box, then move the Dry Time
slider to Less .
computer does not meet system requirements
If your computer does not have enough RAM or a large amount of free space on the