HP M-series HA-Fabric Manager Software - Manual (Page 134)

134 Command Line Interface
Hardreset command
Description Resets the switch and performs a POST. This reset disrupts traffic, activates the pending firmware, and
clears the alarm log. To save the alarm log before resetting, see the Set Log command.
Authority Admin session
Syntax
hardreset
Notes To reset the switch without a POST, see the Reset command.
To reset the switch without disrupting traffic, see the Hotreset command.
See also
Hotreset command , page 137
Reset command , page 146
Set Log command , page 168