HP M-series HA-Fabric Manager Software - Manual (Page 204)

204 Command Line Interface
Uptime command
Description Displays the elapsed up time since the switch was last reset and reset method. A hot reset or
non-disruptive firmware activation does not reset the elapsed up time reported by this command.
Authority None
Syntax
uptime
Examples The following is an example of the Uptime command:
McDATA4GbSAN #> uptime
Elapsed up time : 0 day(s), 2 hour(s), 28 min(s), 44 sec(s)
Reason last reset: NormalReset