HP LP3065c 30 inch LCD Monitor - Manual (Page 12)

Selecting the Signal Connectors and Cables
The monitor features two DVI-D dual-link connectors capable of supporting high resolution digital input.
NOTE The high resolution of the monitor requires a dual-link DVI-D input signal. The monitor
can only display a 2560 x 1600 resolution; therefore, the computer must support a high-
performance video card that is capable of scaling all video modes to 2560 x 1600. The monitor
does not support a VGA (analog) video signal input.
Connect one of the DVI-D signal cables provided to the DVI-D connector on the monitor and the other
end to the DVI-D connector on the computer.
The monitor will automatically determine which inputs have valid video signals. The inputs can be
selected by pressing the Input button on the front panel. Refer to the
Front Panel Controls section for
more information.
Figure 3-3 Connecting the DVI-D Signal Cable
6 Chapter 3 Setting Up the Monitor ENWW