HP Officejet Pro 8000 - A811 - Manual (Page 69)

• Microsoft Windows 2003 Server Terminal Services with Citrix Presentation Server 4.0
• Microsoft Windows 2003 Server Terminal Services with Citrix Presentation Server 4.5
• Microsoft Windows 2003 Server Terminal Services with Citrix XenApp 5.0
• Microsoft Windows 2003 Server Terminal Services with Citrix Metaframe XP with Feature
Release 3
• Microsoft Windows 2003 Small Business Server Terminal Services
• Microsoft Windows Server 2008 Terminal Services
• Microsoft Windows Small Business Server 2008 Terminal Services
• Microsoft Windows 2008 Server Terminal Services with Citrix XenApp 5.0
• Novell Netware 6.5, Open Enterprise Server 2
Compatible network protocols
TCP/IP
Network management
Embedded Web server (Ability to remotely configure and manage network printers)
Embedded Web server specifications
Requirements
• A TCP/IP-based network (IPX/SPX-based networks are not supported)
• A Web browser (either Microsoft Internet Explorer 7.0 or higher, Mozilla Firefox 3.0 or higher,
Safari 3.0 or higher, or Google Chrome 3.0 or higher)
• A network connection (you cannot use the embedded Web server connected directly to
a computer with a USB cable)
• An Internet connection (required for some features)
NOTE: You can open the embedded Web server without being connected to the
Internet. However, some features are not available.
NOTE: The embedded Web server must be on the same side of a firewall as the printer.
Media specifications
Use these tables to determine the correct media to use with your printer, and determine what
features work with your media.
• Understand specifications for supported media
• Guidelines for printing on both sides of a page
Understand specifications for supported media
Use the tables to determine the correct media to use with your printer, and to determine what
features work with your media.
• Understand supported sizes
• Understand supported media types and weights
Understand supported sizes
NOTE: Tray 2 is available with some models.
NOTE: If you are using the duplexer, the minimum top and bottom margins must be at least
12 mm (0.47 inch).
Printer specifications 65