Specifications – HP NC360T PCI Express Dual Port Gigabit Server Adapter User Manual
Page 11
Specifications 11
Specifications
In this section
UTP cable specifications.......................................................................................................................... 12
RJ-45 pinouts and crossover function ........................................................................................................ 12
HP NC360T PCI Express Dual Port Gigabit Server
Adapter specifications
Specification Value
Network Controller Chipsets Intel® 82571EB Dual MAC/PHY
Bus Type
x4 PCI Express v1.0a
Bus Width
Four lane
Clock Speed
100 MHz
On-board Memory
96 KB
Data Transfer Method
Bus Master DMA
Boot ROM Support
Yes
Management Capabilities
WOL, PXE 2.2, ACPI 1.1a
Power Requirement
1280 mA @ 3.3 VDC max
Data Transmission Rate
10 Full/10 Half, 100 Full/100 Half, 1000 Full
Standards Supported
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x (flow control), IEEE
802.3ad (link aggregation), IEEE 802.1p (QoS), IEEE 802.1q (VLAN tagging)
Dimensions
12.95 cm x 6.86 cm [5.1 in x 2.7 in (L x W)] (without bracket)
Connector and Distances
10BASE-T: Category 3, 4, or 5 UTP 100 M (328 ft)
100BASE-TX: CAT5 UTP 100 M (328 ft)
1000BASE-TX: CAT5 UTP 100 M (328 ft)
Interrupts Supported
Automatically configured
Temperature Range
Operating: 0°C to 55°C (32°F to 131°F)
Storage: -30°C to 60°C (-22°F to 140°F)
Relative Humidity (non-
condensing)
Operating: 20% to 75%
Storage: 20% to 80%
Safety Compliance
UL Mark (US and Canada)
CE Mark
EN 60590
RoHS (European Union)