3 support matrix – HP OneView for Microsoft System Center User Manual
Page 6
3 Support Matrix
This chapter provides the support matrix for each of the HP features that integrate with Microsoft
System Center Operations Manager (SCOM).
NOTE:
HP SCOM Management Pack products are English only. However, the installation features
and managed Windows servers may run other language versions of Microsoft Windows including
English, French, German, Italian, Spanish, Simplified Chinese, and Japanese.
HP BladeSystem Management Pack (v 2.1) for System Center
Support
Category
The SCOM environment must have one of the following
Microsoft System Center products available:
System Center Products
•
Operations Manager 2012
•
Operations Manager 2012 SP1
•
Operations Manager 2012 R2
•
Operations Manager 2007
•
Operations Manager 2007 SP1
•
Operations Manager 2007 R2
Not applicable.
Operating Systems
Not applicable.
HP Insight Management Agents
Not applicable.
ProLiant Support Pack
The following HP BladeSystem enclosures are supported
for management:
Hardware Dependencies
•
HP BladeSystem c3000 Enclosure
•
HP BladeSystem c7000 Enclosure
HP recommends Onboard Administrator firmware version
4.0 or later.
The following management pack must be imported:
•
HP ProLiant Server Management Pack for System Center
The following HP SCOM Management Pack features must
be installed in the SCOM environment:
Other Dependencies
•
HP Device Monitor Console 1.0 or later
•
HP Device Monitor Service 1.0 or later
HP ProLiant Agentless Management Pack (v 3.3) for System Center
Support
Category
The SCOM environment must have one of the following
Microsoft System Center products available:
System Center Products
•
Operations Manager 2012
•
Operations Manager 2012 SP1
•
Operations Manager 2012 R2
•
Operations Manager 2007
6
Support Matrix