HP NonStop G-Series - Manual (Page 35)

Configuring MSMM on the NonStop System
Mid-Range Silo Media Manager Installation and User’s Guide — 541530-001
3 -5
Configuration Options
SET_SECURITY
Type SET_SECURITY to enable or disable security for the MSMM GUI.
The SET_SECURITY command in the configuration to set security either off or on for
the GUI. The SET_SECURITY command is set to either Y/N, see above.
YES means you want security enabled. A guardian logon will be required to access the
GUI and the LMM password will be required to MOUNT/DISMOUNT/LABEL and use
the commands on the SERVICES tab.
NO means it works with the normal security. No logon needed to access the GUI,
MOUNT/DISMOUNT or label tapes. The MSMM password would still be needed on the
Services tab.
When the GUI is accessed with SECURITY enabled, you will receive the following box
that requires a valid guardian logon:
Figure 3-4. SET_SECURITY