HP 3PAR Geocluster Software - Manual (Page 43)

3PAR GeoCluster 1.0.0.14 for Windows User’s Guide
320-200263 Page 43

OnlineThread: Unable to read properties, error:<Windows error
code>
Severity level: Error.
Explanation: The 3PAR GeoCluster for Windows resource parameters (set in the
Parameters tab of the resource in Failover Cluster Manager) could not be read. Typically, it
may have been left empty.

OnlineThread: Unable to find the synchronous remote copy group
\"<Remote Copy group name>" on the local InServ.
Severity level: Error.
Explanation: The Remote Copy group could not be accessed from the InServ located on
the same site as the node attempting to bring the 3PAR GeoCluster for Windows resource
online.

OnlineThread: Unable to find the synchronous remote copy group
\"<Remote Copy group name>" on the remote InServ.
Severity level: Error.
Explanation: The Remote Copy group could not be accessed from the InServ located on
the site remote to the node attempting to bring the 3PAR GeoCluster for Windows resource
online.

OnlineThread: Error <Windows error code> bringing resource
online.
Severity level:
Error.
Explanation: MSCS experiences an error bringing the resource online. This event will be
found at the end of any event sequence leading to a failure to bring the 3PAR GeoCluster
for Windows resource online.

OnlineThread: Everything is good, primary locally and started.
Severity level:
Informational.
Explanation: This event indicates that the 3PAR GeoCluster for Windows resource was
able to connect to the InServ located on the same site, was able to access the Remote Copy
group set in its parameters and found it to have the primary role and started.

OnlineThread: RC configuration not complete, remote copy group
\"<Remote Copy group name>" status is \"New\".
Severity level: Informational.
Explanation: Remote Copy configuration was found incomplete during the process of
bringing the InServ Cluster Resource online, as the Remote Copy group status was “New”.