HP L2045w 20-inch Widescreen LCD Monitor - Manual (Page 22)

3. If mounting the monitor using another manufacturer’s solution, use the screws previously
removed from the monitor base to mount the display to a swing arm or other mounting fixture.
Consult the documentation included with the mounting fixture for additional instructions.
CAUTION This monitor supports the VESA industry-standard 100mm mounting holes.
To attach a third-party mounting solution to the monitor, four 4mm, 0.7 pitch, and 10mm
long screws are required (not provided with the monitor). Longer screws should not be
used because they may damage the monitor. It is important to verify that the
manufacturer’s mounting solution is compliant with the VESA standard and is rated to
support the weight of the monitor display panel. For best performance, it is important to
use the power and video cables provided with the monitor.
Figure 3-17 Mounting the Monitor Using a Third-Party Solution
16 Chapter 3 Setting Up the Monitor ENWW