HP Integrity BL870c i2 Server-Blade - Manual (Page 48)

Command line 48
Item Description
->add profile MyNewProfile SNType=User-Defined
SerialNumber=VCX0113121 UUID=15713c60-fcf2-11dc-a656-
0002a5d5c51b
Creates a new profile and specifies a custom virtual serial number and UUID
Item Description
assign profile Assign a server profile to a device bay.
Syntax assign profile <ProfileName> <DeviceBay> [-PowerOn]
Parameters
ProfileName
(required)
The unique name of the server profile to assign
DeviceBay
(required)
The device bay to assign the profile to, in the format
<EnclosureID>:<DeviceBayNumber>
If EnclosureID is not specified, it defaults to the local enclosure.
To assign a profile to a multi-blade server, <DeviceBay> must be a monarch
bay.
Option
PowerOn Powers on the server after the profile has been assigned.
Example
->assign profile MyProfile1 enc0:1
Assigns a profile to device bay 1 of the primary enclosure
->assign profile MyProfile1 enc0:5
Assigns a profile to a multi-blade server in bays 5-8 of the primary enclosure
Item Description
remove profile Remove one or more server profiles from the domain.
Syntax remove profile <ProfileName | *>
Parameter
ProfileName
(required)
The name of an existing profile in the VC domain. "*" removes all the existing
profiles.
Examples
->remove profile MyProfile
Removes a server profile by name
->remove profile *
Removes all server profiles
Item Description
set profile Modify properties of an existing server profile.
Syntax set profile <ProfileName> [Name=<NewName>]
[EFIState=absent]
Parameter
ProfileName
(required)
The current name of the profile to modify
Properties