HP 3PAR StoreServ 7000 Storage - Manual (Page 120)

Table 55 Data Table (continued)
Description Data Table
Represents the aggregation of all the FC 15K RPM PDs in the HP 3PAR StoreServ Storage. statpd_fc15sum
Represents the aggregation of all the SSD PDs of speed 150 in the HP 3PAR StoreServ Storage. statpd_ssd150sum
Logical Disk performance table. statld
VLUN performance table. statvlun
CPU performance table. statcpu
Resolution
The resolution of data table on which the rule operates. This also implicitly determines how often
the rule is evaluated because the rule is evaluated after each sample at the specified resolution.
The available resolutions are described in Table 56 (page 120) .
Table 56 Resolution
Description Resolution
Data table that contains the high resolution samples. hires
Data table that contains the hourly samples hourly
Data table that contains the daily samples daily
System
If System is specified, the alert rule is calculated only for objects in the specified system. If System
is left blank the alert rule is calculated for all systems.
Metric
The metric that is calculated for the given data table and resolution. The metric is calculated per
relevant object (not the aggregate of the objects) in the data table (ports for statport, PDs for statpd,
LDs for statld, VLUNs for statvlun and nodes for statcpu). The supported metrics depend on the
value of Data Table. Currently supported metrics are described in
Table 57 (page 120) .
Table 57 Metric
Data Tables Description Metrics
statport, statport_nodesum, statport_syssum,
statpd, statpd_nl7, statpd_fc10, statpd_fc15, Read IO operations/sec read_iops
statpd_ssd150, statpd_sum, statpd_nl7sum,
statpd_fc10sum, statpd_fc15sum,
statpd_ssd150sum, statld, statvlun
statport, statport_nodesum, statport_syssum,
statpd, statpd_nl7, statpd_fc10, statpd_fc15, Write IO operations/sec write_iops
statpd_ssd150, statpd_sum, statpd_nl7sum,
statpd_fc10sum, statpd_fc15sum,
statpd_ssd150sum, statld, statvlun
statport, statport_nodesum, statport_syssum,
statpd, statpd_nl7, statpd_fc10, statpd_fc15, Total IO (read + write) operations/sec total_iops
statpd_ssd150, statpd_sum, statpd_nl7sum,
statpd_fc10sum, statpd_fc15sum,
statpd_ssd150sum, statld, statvlun
statport, statport_nodesum, statport_syssum,
statpd, statpd_nl7, statpd_fc10, statpd_fc15, Read KBytes/sec read_kbps
statpd_ssd150, statpd_sum, statpd_nl7sum,
120 Configuring the System Reporter Policy Settings