HP 3PAR StoreServ 7000 Storage - Manual (Page 85)

Table 14 Begin/At Time
Purpose Option
Begin with the earliest sample available. earliest
Begin at the specified time value. The values in the menu are populated based on the
actual samples in the selected data table. a list of specific time values
Begin at the specified time before the current time. a list of relative time values
NOTE: Since the Summary Report requires data from both Space and Performance samples, the
Begin/At Time control will only include times that have both space and performance samples.
End Time
The End Time control specifies the end of the time range. It is only valid for Versus Time or Histogram
Versus Time reports.
Table 15 End Time
Purpose Option
End with the most recent sample available. most recent
End at the specified time value. The values in the menu are populated based on the
actual samples in the selected data table. a list of specific time values
Count
This control is only valid for Histogram At Time or Histogram Versus Time reports.
Table 16 Count
Purpose Option
Only count accesses within the current sample interval Current sample
Count all accesses from the beginning (object creation or system reboot) until the
current sample. Total
Object Selection
The type of object that can be selected and the available options depend on the type of report
that is being generated.
For more information, see:
“Select PDIDs” (page 86)
“Include Chunklets” (page 86)
“Select Cage IDs” (page 86)
“Select Disk Types” (page 86)
“Select Disk Speed” (page 86)
“Include PDs in States” (page 87)
“Select Usr CPGs” (page 87)
“Select Snp CPGs” (page 87)
“Select CPGs” (page 88)
“Select LDs” (page 88)
Creating Custom Reports 85