Include pds in states, Select usr cpgs, Select snp cpgs – HP 3PAR StoreServ 7000 Storage User Manual
Page 87
Table 21 Select Disk Speed
Purpose
Option
The report will include all the Disk Speeds that are included in the database.
-All Disk Speeds-
Select one or more Disk Speeds to include in the report. Multiple Disk Speeds can
be selected using (CTRL-CLICK). Currently available disk speeds are:
list of specific Disk Speeds.
•
10- 10 K RPM disks
•
7- 7200 RPM disks
•
15 - 15 K RPM disks
•
150 - SSDs
Include PDs in States
This control is only available for PD Space reports.
Table 22 Include PDs in States
Purpose
Option
Include all PD in the report.
-All PD States-
Include PDs in a valid state in the report.
valid
Include PDs not in a valid state in the report.
Not valid
Select Usr CPGs
This is a filtered multi-selection control (see
“Filtered Multi-Selection Control” (page 53)
) used to
select one or more Usr CPGs to include in the report. This control is available for VV Space reports.
NOTE:
For HP 3PAR OS releases earlier than 2.3.1, a single CPG could be associated with a
VV to provision its snapshot copy space. For thin provisioned VVs, this snapshot copy space was
also used for provisioning the base VV’s space (the usr space).
Beginning with the HP 3PAR OS release 2.3.1, thinly-provisioned VVs can have separate spaces
and corresponding separate CPGs to provision the base VV (usr CPG) and the snapshot copy
space (snp CPG).
The VV space report therefore provides separate controls to select the Usr CPGs and the Snp CPGs.
Since LDs can only belong to one CPG, the LD space reports only have a single Select CPG control
(see
).
Table 23 Select Usr CPGs
Purpose
Option
The report will include all the Usr CPGs that are included in the database.
-All CPGs-
Select one or more Snp CPGs to include in the report. Multiple CPGs can be selected.
list of specific CPGs
Select Snp CPGs
This is a filtered multi-selection control (see
“Filtered Multi-Selection Control” (page 53)
) used to
select one or more Snp CPGs to include in the report. This control is available for VV Space reports.
See note in
.
Creating Custom Reports
87