Product features, Hp ips monitors, 1 product features – HP Z Display Z27i 27-inch IPS LED Backlit Monitor User Manual

Page 7: 1product features

Advertising
background image

1

Product Features

HP IPS Monitors

The LCD (liquid crystal display) monitors have an active matrix, In-Plane Switching (IPS) panel. The
monitor models and features include:

Z24i model, 60.96 cm (24-inch) diagonal viewable area display with 1920 x 1200 resolution, plus
full-screen support for lower resolutions: includes custom scaling for maximum image size while
preserving original aspect ratio

Z27i model, 68.58 cm (27-inch) diagonal viewable area display with 2560 x 1440 resolution, plus
full-screen support for lower resolutions; includes custom scaling for maximum image size while
preserving original aspect ratio

Z30i model, 76.2 cm (30-inch) diagonal viewable area display with 2560 x 1600 resolution, plus
full-screen support for lower resolutions; includes custom scaling for maximum image size while
preserving original aspect ratio

Non-glare panel with an LED backlight

Wide viewing angle to allow viewing from a sitting or standing position, or moving from side-to-
side

Tilt capability

Pivot capability to rotate the display from landscape to portrait

Swivel and height adjustment capabilities

Removable stand for flexible monitor panel mounting solutions

HP Quick Release 2 to quickly install the monitor with a simple click and remove it with the
convenient sliding tab release

Optional thin client mounting bracket that attaches to the rear of the stand (purchased
separately)

Easy access pull-out information card with the information needed when contacting HP support

Video signal input to support VGA analog (cables are provided with select models)

Video signal input to support DVI digital (cables are provided with select models)

Video signal input to support DisplayPort digital (cables are provided with select models)

Video signal input to support HDMI digital (Z27i and Z30i models only)

Audio output headphone jack (Z27i and Z30i models only)

USB 2.0 hub (Z24i models) or USB 3.0 hub (Z27i and Z30i models) with one upstream port
(connects to the computer) and four downstream ports (connects to USB devices)

USB cable provided to connect the monitor's USB hub to the USB connector on the computer

Supports an optional HP speaker bar

Plug and play capability if supported by your operating system

HP IPS Monitors

1

Advertising