HP Surestore 6164 Switch - Manual (Page 57)

Zoning Telnet Commands 57
zoneRemove
Remove a member from a zone.
Synopsis zoneRemove zoneName, zoneMemberList
Availability Administrator
Description Use this command to remove one or more members from an existing zone.
The member list is located by an exact string match, therefore, it is
important to maintain the order when removing multiple members. For
example, if a zone contains “array2; array3; array4”, removing “array3;
array4” succeeds, but removing “array4; array3” fails.
If all members are removed, the zone is deleted.
Operands The following operands are required:
Example To remove “array2” from “Blue_zone”:
See Also zoneAdd
zoneCreate
zoneDelete
zoneShow
zoneName Name of the zone, in quotes.
zoneMemberList List of members to be removed from zone, in
quotes, separated by semi-colons. Can be one or
more of the following:
• Physical fabric port numbers
• Worldwide names
• QuickLoop AL_PAs
• Zone alias names
sw5:admin> zoneRemove "Blue_zone", "array2"