HP Deskjet 932c Printer - Manual (Page 8)

English
8
If there is a paper jam in the HP Two-Sided Printing Accessory:
1 Turn your HP Product off.
2 Press the button on top of the
HP Two-Sided Printing Accessory
and lower the access door.
3 Pull the jammed paper out of the
Accessory, then close the access
door.
4 Turn your HP Product back on.
5 Print your document again.
Windows Troubleshooting Tips
If you are using Windows and are unable to select the Automatic
option on the Features tab when the HP Two-Sided Printing Accessory
is attached:
1 Enable HP Two-Sided Printing Accessory in your HP Product’s software again
(see page 4).
2 Print your document again (see pages 4 and 5).
If you are using Windows and Two-Sided Printing was selected, but
printing is only on one side of the paper:
1 Re-attach the HP Two-Sided Printing Accessory (see page 3).
2 Check the Features tab to ensure you have checked Two-Sided Printing
(see page 4).
3 Print your document again (see pages 4 and 5).
4 If your document is still printing on only one side of the paper, be sure that
you have selected a supported media size (see page 10) in the software
program that you are using. Then print your document again.
Note: This method does not apply for OfficeJet Products.
Hyde_UG_8.fm Page 8 Tuesday, January 4, 2000 9:29 AM