Upgrading or replacing controller options, Installing or replacing a battery, Installing a battery – HP ProLiant DL580 G4 Server User Manual

Page 20

Advertising
background image

Upgrading or replacing controller options 20

Upgrading or replacing controller options

In this section

Installing or replacing a battery................................................................................................................ 20
Upgrading the cache .............................................................................................................................. 22

Installing or replacing a battery

The procedure for replacing an existing cache battery ("

Replacing a battery

" on page

21

) is different

from the procedure for installing a battery into a server that does not have one ("

Installing a battery

" on

page

20

).

Installing a battery

WARNING: There is a risk of explosion, fire, or personal injury if the battery pack is not

properly handled. Refer to "Battery replacement notice (on page

38

)" before installing or

removing any item that contains a battery pack.

1.

Close all applications, and then power down the server.

2.

Plug the battery cable (supplied in the battery pack kit) into the battery pack.

3.

Install the new battery pack into the server. (The installation site depends on the server. For further
information, refer to the server-specific user guide.)

Advertising
This manual is related to the following products: