HP EliteBook 725 G2 Notebook PC - Manual (Page 68)

Removing the hard drive
To remove a hard drive:
1. Save your work and shut down the computer.
2. Disconnect AC power and external devices connected to the computer.
3. Turn the computer upside down on a flat surface.
4. Remove the service door (see Removing or replacing the service door on page 56 ) and the
battery (see Removing a battery on page 46 ).
5. Loosen the 4 hard drive cover screws (1). Pull cloth hard drive tab (2) upward, and then remove
the drive .
Installing a hard drive
NOTE: Your computer may look slightly different from the illustration in this section.
To install the hard drive:
1. Place the hard drive into the hard drive bay (1), ensuring that the cloth tab remains on top.
58 Chapter 8 Drives ENWW