HP ProLiant DL380e Gen8 Server - Manual (Page 42)

Hardware options installation 42
15. Install the server into the rack (" Installing the server into the rack " on page 33 ).
16. Power up the server (on page 20 ).
Installing a 2 SFF rear drive cage option
1. Power down the server (on page 20 ).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
o Extend the server from the rack (on page 20 ).
o Remove the server from the rack (on page 22 ).
4. Remove the access panel (on page 23 ).
5. Remove the LFF drive cage blank.