HP EliteBook 8740w Mobile Workstation - Manual (Page 136)

Select To do this
Built-In Device Options ● Enable/disable the wireless button state (enabled by
default).
● Enable/disable embedded WLAN device radio (select
models only; enabled by default).
● Enable/disable the embedded Bluetooth® device radio
(enabled by default).
● Enable/disable the Network Interface Controller (LAN)
(enabled by default).
● Enable/disable LAN/WLAN switching (disabled by
default).
● Set the wake on LAN state. Options include the
following:
◦ Disabled
◦ Boot to Network
◦ Follow Boot Order
● Enable/disable the Ambient Light Sensor.
● Enable/disable the Notebook Upgrade Bay device
(enabled by default).
● Enable/disable the fingerprint device (enabled by
default).
● Enable/disable the integrated camera (enabled by
default).
● Enable/disable the Power Monitor Circuit (enabled by
default).
● Enable/disable the audio device (enabled by default).
● Enable/disable a modem device (enabled by default).
● Enable/disable the microphone (enabled by default).
● Enable/disable the internal speakers (enabled by
default).
Port Options NOTE: All port options are enabled by default.
● Enable/disable the serial port.
● Enable/disable the parallel port.
● Enable/disable the flash media reader.
● Enable/disable the USB port.
CAUTION: Disabling the USB port also disables
MultiBay devices and ExpressCard devices on the
advanced port replicator.
● Enable/disable the 1394 port.
● Enable/disable the ExpressCard slot.
● Enable/disable the Smart Card slot.
● Enable/disable the eSATA port.
124 Chapter 13 Computer Setup