HP ProLiant DL320 G5 Server - Manual (Page 48)

Hardware options installation 48
8. Install the optional PCI riser board.
9. Install the expansion board (on page 45 ).
10. Install the PCI riser board assembly (on page 19 ).
IMPORTANT: The server does not power up if the PCI riser board assembly is not seated
properly.
11. Install the access panel.
12. Install the server into the rack.
Storage controller option
IMPORTANT: For additional installation and configuration information, refer to the
documentation that ships with the option.
1. Power down the server (on page 17 ).
2. Remove the server from the rack (on page 18 ).
3. Remove the access panel (on page 18 ).
4. Remove the PCI riser board assembly (on page 18 ).
5. Remove the fan assembly (on page 20 ).
6. Remove the hard drive cables.
7. Install the storage controller (" Expansion board " on page 45 ).
8. Install the PCI riser board assembly (on page 19 ).
IMPORTANT: The server does not power up if the PCI riser board assembly is not seated
properly.