2 creating a management hub, Section 18.2 – HP Insight Control Software for Linux User Manual
Page 162
18.2 Creating a management hub
Use the following procedure to create a management hub; you can perform Steps 2 and 3 in
reverse order, but both must be done before step 4.
1.
Determine which server or servers you want to act as a management hub.
2.
Install the operating system for that server using the appropriate
or
file;
this file has the form *-management-hub.cfg to ensure that the required RPMs are
installed. For specific information on installing operating systems, see
3.
Add the server to the {collection_name}_Management_Hubs collection as follows:
a.
Select Customize... in the System and Event Collections panel. This figure shows
the location with a red arrow.
The Customize Collections window appears.
b.
Scroll down the list to access Systems Managed by IC-Linux in the Customize
Collections
window and select the + icon.
The list expands.
c.
Select the + icon in the + icelx line.
The list expands again.
d.
Select the icelx_Management_Hubs line and select Edit....
A new window resembling the following opens.
162
Setting up management hubs