Abocom FE1000 - Manual (Page 11)

3.Select Microsoft LAN Manager item on the
menu screen.
4.If current settings are acceptable, select Start
Installation” and go to step 6. Otherwise, select
Modify Parameters” to make setting changed.
5.Move cursor to each field you want to make a
change and press <Enter> to select a fit value.
When the configuration are set completely, press
<Enter> on the OK field to exit the screen and
go back to step 4.
6.Installation program starts to copy related files
from driver diskette to the destination directory
and modifies CONFIG.SYS and
PROTOCOL.INI under usersymbol 146 \f
"Parisian BT" \s 10
’}s agreement.
7. Please reboot the computer to load driver and
start LAN Manager in batch.
-10-