HP Officejet Pro 8100 ePrinter - N811a N811d - Manual (Page 91)

Light description/Light pattern Explanation and recommended action
The HP ePrint light is off. • HP ePrint has not been set up.
To set up HP ePrint, press the
(HP
ePrint) button, and then follow the
instructions on the information page that
prints.
• HP ePrint has been set up but has been
turned off.
To turn on HP ePrint, press the
(HP
ePrint) button.
• HP ePrint is turned on but is unable to
connect.
HP ePrint is unable to connect, possibly
because the server is unavailable or the
network is not functioning properly.
If your network uses proxy settings when
connecting to the Internet, make sure the
proxy settings you are entering are valid.
For more information, see the getting
started guide provided with the printer or
check with the IT administrator or person
who set up your network.
Press the
(HP ePrint) button to try
connecting again.
◦ If the printer can connect, the HP
ePrint light turns on, and the printer
prints an information page.
◦ If the printer still cannot connect,
the HP ePrint light blinks and then
turns off.
• HP ePrint has been set up but has been
turned off because the printer has not
been updated.
If a mandatory update for the printer is
available but has not been installed, HP
ePrint is turned off. After the update has
been installed, HP ePrint turns on
automatically.
For more information about installing the
printer update, see Update the printer.
The HP ePrint light is on. HP ePrint is turned on.
If you press the (HP ePrint) button once, the
printer prints an information page which
provides some instructions on setting up HP
ePrint.
To turn off HP ePrint, press and hold the (HP
ePrint) button. The light blinks for five seconds
before turning off.
(continued)
Control panel lights reference 87