HP LaserJet M3027 Multifunction Printer series - Manual (Page 142)

Embedded Web server sections
Tab or section Options
Information tab
Provides device, status, and
configuration information
● Device Status: Shows the device status and shows the life remaining of HP supplies,
with 0% indicating that a supply is empty. The page also shows the type and size of
print paper set for each tray. To change the default settings, click Change
Settings.
● Configuration Page: Shows the information found on the configuration page.
● Supplies Status: Shows the life remaining of HP supplies, with 0 percent indicating
that a supply is empty. This page also provides supplies part numbers. To order new
supplies, click Order Supplies in the Other Links area on the left side of the window.
● Event log: Shows a list of all device events and errors.
● Usage page: Shows a summary of the number of pages the device has printed,
grouped by size and type.
● Device Information: Shows the device network name, address, and model
information. To change these entries, click Device Information on the Settings tab.
● Control Panel: Shows messages from the device control panel, such as Ready
or Sleep mode on.
● Print: Allows you to send print jobs to the device.
Settings tab
Provides the ability to configure the
device from your computer
● Configure Device: Allows you to configure device settings. This page contains the
traditional menus found on devices using a control-panel display.
● E-mail Server: Network only. Used in conjunction with the Alerts page to set up
incoming and outgoing e-mail, as well as to set e-mail alerts.
● Alerts: Network only. Allows you to set up to receive e-mail alerts for various device
and supplies events.
● AutoSend: Allows you to configure the device to send automated e-mails regarding
device configuration and supplies to specific e-mail addresses.
● Security: Allows you to set a password that must be entered to gain access to the
Settings and Networking tabs. Enable and disable certain features of the
embedded Web server.
● Edit Other Links: Allows you to add or customize a link to another Web site. This
link is displayed in the Other Links area on all embedded Web server pages.
● Device Information: Allows you to name the device and assign an asset number to
it. Enter the name and e-mail address for the primary contact who will receive
information about the device.
● Language: Allows you to determine the language in which to display the embedded
Web server information.
● Date & Time: Allows time synchronization with a network time server.
● Wake Time: Allows you to set or edit a wake time for the device.
NOTE The Settings tab can be password-protected. If this device is on a
network, always consult with the system administrator before changing settings
on this tab.
Networking tab Network administrators can use this tab to control network-related settings for the device
when it is connected to an IP-based network. This tab does not appear if the device is
130 Chapter 10 Manage and maintain the device ENWW