HP Photosmart A617 Compact Photo Printer - Manual (Page 50)

● The print cartridge may need to be aligned. For more information, see Align the
print cartridge .
● Photos may be stacked in the output tray. The printed surface of your photos
needs to be left exposed to the air for up to 5 minutes after printing. Do not place
photos in an album until they have fully developed.
The photos I selected for printing in the digital camera do not print.
Solution Some digital cameras let you mark photos for printing both in the
camera's internal memory and on the memory card. If you mark photos in the internal
memory, and then move photos from the camera's internal memory to the memory
card, the marks do not transfer. Mark photos for printing after you transfer them from
the digital camera's internal memory to the memory card.
Photos will not print from an iPod.
Cause You may have saved your photos to the iPod in low resolution.
Solution Photos must be stored in high resolution for the printer to recognize them.
Check your iPod documentation for information on changing the resolution setting.
Bluetooth printing problems
Before contacting HP support, read this section for troubleshooting tips, or go to the
online support services at
www.hp.com/support . Be sure to also read the documentation
that came with your HP Bluetooth wireless printer adapter (if you are using one) and your
device with Bluetooth wireless technology.
My Bluetooth device cannot find the printer.
Solution
●
If you are using the optional HP Bluetooth wireless printer adapter, make sure
the adapter is plugged into the camera port on the front of the printer. The light
on the adapter flashes when the adapter is ready to receive data.
If the printer has integrated Bluetooth wireless technology, check the Bluetooth
light on the printer. The light flashes when the printer is ready to receive data.
● Bluetooth Visibility may be set to Not visible. Change this setting to Visible
to all as follows:
–
Press Menu.
– Select Bluetooth, and then press OK.
– Select Visibility, and then press OK.
– Select Visible to all, and then press OK.
● Bluetooth Security level may be set to High. Change this setting to Low as
follows:
–
Press Menu.
– Select Bluetooth, and then press OK.
– Select Security level, and then press OK.
– Select Low, and then press OK.
HP Photosmart A610 series User Guide 47