HP OpenView Storage Management Appliance and Software - Manual (Page 22)

Understanding the Storage Management Appliance Software
6 Storage Management Appliance Software User Guide
When initially launching these applications and the Automation core service, the
SMA software eliminates the separate logon. However, after a service is
launched, there are two situations where you might be required to log back on to
the Web server:
■ If the HTTP session times out.
■ If the Web server gets restarted for any reason (which may occur if an
application installation is in progress).
If either of these situations occur, then the System Management logon page opens
(
Figure 2 ).
Figure 2: HP System Management logon screen
You will need to use the System Management logon information to access the
application again. The default settings are as follows:
User—administrator
Password—administrator
The user name and password are case sensitive.
Alternatively, you can close all the application browser windows and launch them
again using the Tools or Devices page.