HP Lights-Out 100 Remote Management - Manual (Page 25)

Using LO100 25
/./system1/> start /system1
System1 started.
4. To power off the server, enter
stop /system1
. For example:
/./system1/> stop /system1
System1 stopped.
The
-force
option can also be used with the
stop
command. This option forces the
implementation to stop the target, ignoring any policy that might cause the implementation to
normally not execute the command. In remote management processor implementation, this process is
equivalent to a hard power down.
5. To reset the server, enter
reset /system1
. For example:
/./system1/> reset
System1 reset.
Monitoring sensors
LO100 provides operating system-independent remote monitoring of the current status of major sensors of
a target server including system temperature, fans, and voltage. You can view the data for this feature on
the Monitoring Sensors Page through a web browser or through the BIOS Setup Utility.
Viewing sensors data from a web browser
The Monitoring Sensors screen displays a snapshot of the temperature, fans, and voltage sensor data,
including sensor type, name, status, and current reading. To access this page from a web browser, click
Monitoring Sensors on the main menu navigation bar.
To update the display, click the Refresh button. To view or add a PEF action, click PEF. See "Platform
Event Filtering configuration (on page 26 )" for more information.
Viewing sensors data from the BIOS Setup Utility
1. Press the F10 key during POST to enter the BIOS Setup Utility.
2. Press the right arrow ( → ) key to navigate to the Advanced menu.
3. Press the down arrow ( ↓ ) key to scroll to IPMI. Press the Enter key.