Advantech INTRAC-305 - Manual (Page 13)

INTRAC-305 SPECIFICATION & OPTIONS
© 2011 Advantech Wireless . INTRAC-305 MANUAL - Issue 3.2 Page 1
2
2. SPECIFICATION & OPTIONS
The following pages contain the specification of the INTRAC-
305, a list and description of the available options and a chart
of the delivered configuration.
Required Mechanical Characteristics of the Antenna System
To enable the full tracking performance of the INTRAC-305
the antenna system must conform to certain overrun and
tracking constraints.
The tracking drive speed must be less than 1 /
10
of the
antenna beamwidth per second and the overrun (drift) when
power is removed from the motors must be less than
1
/
20
of
the beamwidth.
If the system does not conform to these requirements please
consult with Advantech AMT Limited.