HP Integrity BL870c Server-Blade - Manual (Page 22)

6. Unload the seismic rack from the pallet, see:
“Moving the Seismic Rack off the Pallet” (page 26) .
7. Bolt the seismic rack to the floor, see:
“Bolting the Seismic Rack to the Concrete Floor” (page 31) for bolting the rack to a concrete
floor, or “Bolting the Seismic Rack to a Raised Floor” (page 33) for bolting the rack to a raised
floor.
Unpacking the Seismic Rack
WARNING! Wear safety glasses or other eye protection when cutting the banding straps. The
ends of the straps might snap back when cut and could cause an eye injury.
To unpack the seismic rack:
1.
Using heavy-freight-handling equipment, move the shipping pallet as close as possible to the
planned installation area.
ai049
2. Unscrew the screws in the base.
3. Unfasten the metal clips and dispose of them.
4. Remove the side and top panels.
Removing the Rack Door
To provide access to all sides of the rack while you are installing the various components, first
remove the rack doors.
To remove the rack door:
22 Installing the Seismic Rack