HP XP7 Storage - Manual (Page 24)

Releasing HTTP communication blocking
To release the HTTP communication blocking:
1.
Close all Remote Web Console sessions on the SVP.
2. On the Remote Web Console computer, open a web browser. Enter the following URL to open
the Tool Panel dialog box.
https://IP-address-or-host-name-of-SVP/cgi-bin/utility/toolpanel.cgi
3. In the Tool Panel dialog box, click Release HTTP Blocking.
4. Enter the User ID and Password for the root storage administrator, then click Login. The Release
HTTP Blocking dialog box opens.
5. Click OK. A configuration dialog box opens.
6. Click OK to release HTTP blocking. When the configuration change is complete, the SVP web
server reboots. Once the reboot is complete, the Release HTTP Blocking Complete dialog box
opens.
Depending on the environment, it can take 30 to 60 minutes for the web server to restart.
After the SVP restarts, the Completion dialog box does not appear. Instead, an “internal server
error” message is displayed. However, the setting is actually completed
7. Click OK to continue the operation and return to the Login dialog box, or click Cancel to cancel
the operation and return to the Login dialog box.
Setting up a client computer
The Remote Web Console administrator is responsible for setting up the web client on Remote
Web Console computers. This includes the following:
•
Ensure that client computers can handle Remote Web Console. See “Requirements for client
computers” (page 24) .
•
If you are using a Windows server as a Remote Web Console computer, make sure to follow
the instructions in
“Configuring a Windows Server” (page 27) (if applicable).
•
“Setting up TCP/IP for a firewall” (page 27)
•
“Configuring the web browser” (page 27)
•
“Installing Adobe Flash Player” (page 27)
Requirements for client computers
This topic explains the requirements for Remote Web Console computers on supported versions of
the Windows and UNIX/Linux operating systems.
24 Setting up Remote Web Console