Adjusting advanced settings – HP 1.3-Megapixel Ultra Notebook Webcam User Manual
Page 13
HP Webcam User’s Guide
9
Adjusting Advanced Settings
1
In ArcSoft VideoImpression or HP Photosmart Essential,
click Settings.
2
Click the Advanced tab.
3
Select one of the following settings:
Disable turns off Face Tracking, Manual Zoom,
Mask, and Smooth Background.
Face Tracking sets the camera to follow your face
as you move. See
for more
information.
Manual Zoom enables you to control zoom levels
and directions.
Mask hides the face in the center of the image.
Smooth Background softens edges in the
background behind the central face.
4
(Optional) Select the Wide Screen check box to add a dark border above and below the image.
5
(Optional) Select the Video Off check box to turn off the video signal. The screen goes dark when this box is
selected.
6
Click OK.
NOTE: If you can’t adjust the settings on the Advanced
tab, you need to lower the Output Size setting. See