HP LaserJet P2015 - Manual (Page 24)

Operating system To change the settings for all
print jobs until the software
program is closed To change the print job default
settings (for example, turn on
Print on Both Sides by default) To change the configuration
settings (for example, add a
tray or enable/disable Manual
Duplexing)
Windows 98, Me,
2000, XP (32–bit and
64–bit), and Server
2003 1. On the File menu in the
software program, click
Print.
2. Select the name of the
printer, and then click
Properties or
Preferences.
The steps can vary; this
procedure is most common.
1. Click Start, click Settings,
and then click Printers or
Printers and Faxes.
2. Right-click the printer icon,
and then select Printing
Preferences.
1. Click Start, click Settings,
and then click Printers or
Printers and Faxes.
2. Right-click the printer icon,
and then select
Properties.
3. Click the Device Settings
tab.
HP ToolboxFX
HP ToolboxFX is software that you can use to complete the following tasks:
● Check the printer status.
● Configure the printer settings.
● View troubleshooting information.
● View online documentation.
See HP ToolboxFX for more information.
Embedded Web server
You can use the embedded Web server to configure the printer, view status information, and obtain
problem-solving information.
See Embedded Web server for more information.
14 Chapter 3 Product software ENWW