HP LaserJet P2015 - Manual (Page 86)

Status-light patterns
Table 7-1 Status-light legend
Symbol for "light off"
Symbol for "light on"
Symbol for "light blinking"
Table 7-2 Control-panel light messages
Light status State of the printer Action
Initialization/Startup
While in the Startup state, the Go, Ready,
and Attention lights cycle (at the rate of
500 ms) one after another.
Reconfiguration Initialization
During the printer start up, you can
request special initialization sequences
that reconfigure the printer. When one of
the sequences is requested, such as cold
reset, the lights cycle as in the
Initialization/Startup state.
Job Cancel
After the cancellation process has been
completed, the printer returns to the
Ready state.
During the Initialization, Reconfiguration,
and Job Cancel processes, pressing
buttons has no effect.
76 Chapter 7 Problem solving ENWW