Operating instructions – Audiovox P-72 User Manual
Page 3
OPERATING INSTRUCTIONS
-1-
1
ON/OFF POWER BUTTON
Press this button to turn the unit on or off.
2
VOLUME / LEVEL CONTROL
To increase the volume level, press the “VOL +” button. The
volume will increase and the level will be shown on the display
panel from a minimum of “VOL. 0” to a maximum of “VOL. 40”.
To increase the volume quickly, keep the button pressed. To
decrease the volume level, press the “VOL -” button. Keep the
button pressed to decrease the volume quickly. The display will
automatically return to the normal indication 5 seconds after the
last volume adjustment or when another function is activated.
These buttons are also used in conjunction with the Select but-
ton
3
to adjust the bass, treble, balance, and fader levels as
described in
4
,
5
,
6
and
7
.
3
SELECT BUTTON (SEL)
This button is used to select the audio function (volume, bass,
treble, balance, or fade) to be adjusted using the Level Control
2
. Pressing the Select button once will set the unit for bass
adjustment (“BAS.” will appear on the display panel). Pressing
the button additional times will select treble (“TRE.” on the dis-
play), balance (“BAL.”), fader (“FAD.”) or volume (“VOL.”). The
display will automatically return to the normal indication 5 sec-
onds after the last adjustment or when another function is acti-
vated.
4
BASS CONTROL
To adjust the bass level, first select the Bass mode by pressing
the Select button
3
so that the “BAS.” indication appears on
the display panel. Within 5 seconds of choosing the Bass mode,
b
s
bt
b
u
8
cr
c
m bl
ct cs
c
o
b
q
d
o
2
dl
b
m
c
p
b
p
b
o
br
cl
3
1
c
q
c
n
c
u
d
m
9 9 9
P-3
P-2
P-1
d
n
b
n