HP Insight Management-Software User Manual
Page 71
Table 36 VCEM server error messages and descriptions (continued)
Error message description
NOTE:
The error message descriptions in this table use
[x] to represent variables in the error message output.
Error message number
be accessed from your CMS environment and is locked to
this VCEM then perform the operation again.
VCEM could not update the VC Domain Group
configuration because there is at least one unlicensed VC
Domain inside the specified VC Domain Group.
2151
The operation cannot be performed because the new VC
Domain Group configuration is not compatible with server
2152
profiles already existing in the VC Domain Group. Some
networks or FC SAN fabrics in use by server profiles might
have been deleted. Verify there are no server profiles using
the networks or FC SAN fabrics that should be removed
and perform the operation again.
VCEM did not update the VC Domain Group configuration
because the master VC Domain was not being updated
when the operation was confirmed or canceled.
2153
VCEM could not update the VC Domain Group [x]
configuration because there are server profiles [x] still using
2154
the following resources that were removed during VC
Domain Maintenance: [x]
Verify all these resources exist and then perform the
operation again.
Cannot put VC Domain [x] into maintenance because its
VC Domain Group [x] already has another VC Domain in
2156
maintenance. Perform operation again when the VC
Domain Group does not have any VC Domain in
maintenance.
VCEM could not perform the requested operation due to
concurrent database access trying to save out of date
2167
information. Verify that there is no other user or process
using the resources involved in this operation and then
perform the operation again.
The operation could not be completed because the VC
Domain is under maintenance.
2170
VCEM cannot perform the operation because the hardware
disposition was changed during VC Domain maintenance
in the VC Domain [x].
2176
Verify the following:
- The enclosure model matches the model of the other
enclosures that belong to the VC Domain Group.
- The VC modules in the enclosure match the model,
disposition, and power status of the other VC Domains that
belong to the VC Domain Group.
- The VC Domain support for double-density blades matches
the support for double-density blades of other VC Domains
that belong to the VC Domain Group.
- Remote enclosures were imported in the same order as
remote enclosures from other VC Domains already
managed in the VC Domain Group, and they have the
same VC Ethernet and FC module disposition. (For
example, Remote enclosure 1 from a VC Domain must
match the VC module disposition of Remote enclosure 1
from other VC Domains in the VC Domain Group.)
71