HP Access Control - Manual (Page 18)

5.2 Pull Print – Login by user code and PIN code
To log in to Pull Print with user and PIN code information, complete the following steps:
1. Log in by numeric user code [0-9].
Figure 5-2 Login by numeric user code [0–9]
a. Press OK or Menu.
b. Scroll to “User code.” Press OK.
c. Enter user code on keypad. Press the Down ( ) once to get Enter ( ). Press OK.
d. Scroll to PIN code. Press OK.
e. Enter PIN code on keypad. Press OK.
2. Pull Print.
●
Print all at login:
Documents start to print right after login if Print all at login is enabled.
● Print all:
Press OK, scroll to Print all (x) and press OK.
● Print selected document:
Press OK, scroll to Document list… and press OK. To print the listed document (Doc: <name>) scroll
to Print job and press OK. To select another document press Doc: <name> and scroll to the
document, press OK, scroll to Print job and press OK.
3. Log out. Do one of the following:
●
Leave device idle for 60 seconds.
● Press OK, scroll to Logout and press OK.
● Use card reader.
14 Chapter 5 Using HP Access Control (HP AC) Secure Pull Print on printers