Removing drivelock protection – HP Mini 5102 User Manual
Page 68
Removing DriveLock protection
To access the DriveLock settings in Computer Setup, follow these steps:
1.
Open Computer Setup by turning on or restarting the computer, and then pressing
esc
while the
"Press the ESC key for Startup Menu" message is displayed in the lower-left corner of the screen.
2.
Press
f10
to enter BIOS Setup.
3.
Use the arrow keys to select Security > DriveLock passwords, and then press
enter
.
4.
Use the arrow keys to select the location of the internal hard drive, and then press
f10
.
5.
Use the arrow keys to select Disable in the Protection field, and then press
f10
.
6.
Type your master password in the Old password field. Then press
f10
.
7.
To save your preferences, use the arrow keys to select File > Save changes and exit. Then follow
the instructions on the screen.
Your preferences go into effect when the computer restarts.
58
Chapter 5 Security