HP Color LaserJet CP3520 Printer Series - Manual (Page 49)

Figure 3-10 Configure Security Settings screen (2 of 2)
5
6
7
8
Table 3-7 Configure Security Settings
Callout Area on the screen Information or capability that the area provides
1 Device Password Use this feature to set your password using a maximum of 16 characters. The device
password allows you to control who can access and change device settings.
To assign or change the device password:
1. If the device currently has a password assigned, type the current device password
in the Old Password text box.
2. Leave the New Password and Verify Password text boxes blank.
3. Type the same device password in the Verify Password text box.
4. Click Apply at the bottom of the page.
5. An authorization dialog box appears. Use the new password to re-authenticate
to the device.
To disable the device password:
1. Type the current device password in the Old Password text box.
2. Leave the New Password and Verify Password text boxes blank.
3. Click Apply at the bottom of the page.
4. An authorization dialog box appears. Use the new password to re-authenticate
to the device.
2 PJL Password PJL (Printer Job Language) is a command language that enables some features of the
printer such as banner pages. Setting the PJL Password locks access to these PJL
features.
Set the PJL Password so that only authorized users can access PJL enabled features.
The PJL Password can be any number between 1 and 2147483647.
ENWW Security 39