HP OneView for VMware vCenter - Manual (Page 58)

◦ P6000 EVA—Host mode assigned to the P6000 EVA host object
◦ P2000/MSA2000—Name of the host's profile
◦ P9000/XP—Host mode assigned to the host group
•
Host Name—Host name
•
Current Owner—Specifies whether the host is the current owner of the selected VM
•
Host HBA Port WWN
P4000—IQN assigned to the host ◦
◦ 3PAR (FC)—WWN for the host port on the host end of this path
◦ 3PAR (iSCSI)—IQN assigned to the host
◦ P6000 EVA—WWN for the host port on the host end of this path
◦ P2000/MSA2000 (FC, SAS)—WWN for the host port on the host end of this path
◦ P2000/MSA2000 (iSCSI)—IQN assigned to the host
◦ P9000/XP—WWN for the host port on the host end of this path
•
Array Port WWN
P4000—IQN used by the host for connecting to this disk on this storage array ◦
◦ 3PAR (FC)—WWN for the storage array port on the storage array end of this path
◦ 3PAR (iSCSI)—IQN used by the host for connecting to this disk on this storage array
◦ P6000 EVA—WWN for the storage array port on the storage array end of this path
◦ P2000/MSA2000 (FC, SAS)—WWN for the storage array port on the storage array
end of this path
◦ P2000/MSA2000 (iSCSI)—IQN used by the host for connecting to this disk on this
storage array
◦ P9000/XP—WWN for the storage array port on the storage array end of this path
•
LUN Number—LUN used for presenting the storage disk from the storage array port to the
host HBA port
•
Path ID—Path ID assigned by VMware
•
Preferred Path
P4000—Not applicable ◦
◦ 3PAR—Not applicable
◦ P6000 EVA—Specifies whether the path uses a port on the controller that is configured
as the preferred path for the vdisk (Yes, No, No preference)
◦ P2000/MSA2000—Not applicable
◦ P9000/XP—Not applicable
•
Active Path—Specifies whether the path is active or in standby status
58 Using Insight Control for vCenter