HP StorageWorks 2300 Disk System - Manual (Page 57)

Installation 57
In
st
al
la
ti
o
n
2. Study the installation overview (see Figure 26 )
The following tools are required for the installation of the storage device:
■ Flat-blade screwdriver
■ T25 nut driver
WARNING To ensure cabinet or rack stability and avoid possible injury,
always install storage devices in the rack or cabinet from the
bottom up.
3. Locate a place on the rack columns with the available space required
for the installation of the storage device. The storage device and the
rail kit require 4 EIA units of space, three units for the storage device
and one unit for the rails (see
Figure 27 ).