HP MPX200 Multifunction Router - Manual (Page 95)

3–Viewing Router Information
Discovered iSCSI Initiators
ISR654602-00 H 3-39
Information
The Information page for a discovered iSCSI initiator contains two sections:
Initiator Information and CHAP Settings, as shown in
Figure 3-21 .
Figure 3-21. Discovered iSCSI Initiator: Information Page
Initiator Information
The Initiator Information section provides the following parameters:
 iSCSI Alias specifies the iSCSI initiator’s alias, which the initiator provides
when it logs into the iSR6200 router blade.
 iSCSI IP Address x shows the IPv4 address of the discovered iSCSI
initiator.
 iSCSI IPv6 IP Address x shows the IPv6 IP address of the discovered
iSCSI initiator.
 OS Type Selection provides options to select the operating system type for
the discovered initiator. The iSR6200 router blade uses the OS type to
enable OS-specific commands. Type options include: Other, MS Windows
2003, Linux, HPUX, Mac, Solaris, VMware, OpenVMS, Windows 2008,
and Windows 2012.
 Status is the activity status for the selected initiator.